High Speed 1inch Electric Automatic Manual Hydraulic Hose Crimper

YHHC-91A is a crimping machine for hydraulic hose sizes from 1/8’’ to 2’’. It is sold with 10 sets of standard dies that is used for different size of hoses. There are lubricated groove on the frictional surface, in which self-supported oil can come true. YH ensure quality machine provided and after-sales service is available.

Λεπτομέριες

Part no.: YHHC-91A
Two types of speed, using variable pump, power saved and high speed
Dies changed in axis position, and special-shaped big bend can be fitted
There are lubricated groove on the frictional surface, in which self-supported oil can come true
Stock: Available
Shipping term: Within 10 days after receive the payment or according to invoice made
YH Advantage: Quality updated; Reasonable price; Nice service

Πίνακας τεχνικών δεδομένων

Περιοχή Crimper	1/8’’-2’’ 4SP
Τυπική τάση & κινητήρας	380V/3KW
Άνοιγμα χωρίς πεθαίνουν	Φ119mm
Ανοιγμα	≥25mm
Προαιρετική τάση & κινητήρας	220V/2.2KW
Όχι από το τυποποιημένο σύνολο	10 sets
Συστηματική πίεση	30MPa
Βάρος	296KGS
Όγκος (L * W * H)	800mm635mm1376mm

Συχνές ερωτήσεις

Trouble phenomena	Trouble reason	Eliminating method
Machine has not action	Oil tank has not been filled with oil	Fill oil as per requirement
	Motor rotation direction is not correct	Regulate two phase lines
	Electric trouble	Overhaul electric circuits
Scale is damaged	The scale is fastened on the oil cylinder end face by the screw	Regulate the scale as per the instruction to make scale to telescope freely
	Conductor at scale location is connected with scale	Anew connect the scale conductor to make it to be insulated from scale base
	Electric trouble	Overhaul electric circuits and electric elements
	Scale conductor cutting	Anew connect scale
	System pressure is excessively low	Adjust buckling pressure-regulating valve
No buckling	The valve core of solenoid reversal valve is seizured by foreign matters	Dismount solenoid reversal valve, use gasoline to clean the valve core.
No buckling	Electric trouble	Overhaul electric circuits
Mould is not opened	Opening mould pressure is excessively low	Adjust opening mould pressure regulating valve
	Electric trouble	Overhaul electric circuits
	Lubrication is poor	Smear grease on the working inclined face of mould base
Oil leakage	Joint is not tightened closely	Tighten the oil pipe joint
Oil leakage	Sealing washer is damaged.	Replace sealing washer